Canon imagePROGRAF PRO-4000S Drivers Download

Canon imagePROGRAF PRO-4000S Drivers Download

Canon imagePROGRAF PRO-4000S Drivers Download – As I specified in a current post, my old huge arrangement printer has surrendered the phantom, so I’ve recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my assessment of this new printer.

Cutting straight to the chase, with my old 24″ iPF6350 breaking after only six years, for a couple of moments, I considered moving far from Canon for my expansive arrangement printing, yet then I understood that there was another line of substantial configuration printers that has recently been declared, so I chose to investigate, and was extremely energized by what I saw.

At first, I was essentially going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, yet in spite of the fact that this new scope of PRO printers are smaller, they are more than double the stature, which implies the PRO-2000 can’t be conveyed up to my third floor studio. It basically won’t fit around the highest point of the stairs, even remained on end.

There was a choice to have it crane lifted up to the third floor and go in through the window, however this would cost $1,500, and afterward obviously another $1,500 to have it brought down again on the off chance that I move, or when it unavoidably breaks again sooner or later what’s to come.

I assumed if I would spend another $3,000 I should put that cash towards an imagePROGRAF PRO-4000, which is the 44″ wide huge sibling of the PRO-2000, and have that introduced on my second floor rather than up in my studio. What’s more, when I say huge sibling,

Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various substantial prints on three sorts of Breathing Color media, and I was exceptionally content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, yet the 2000 and 4000 are essentially indistinguishable aside from the width of move media that can be utilized. This additionally implies this audit will be similarly as valuable on the off chance that you are thinking about the PRO-2000 as it will for the PRO-4000.

Anyway, my PRO-4000 landed on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming acquainted with this excellent new bigger arrangement printer from Canon.

What’s New?

Before we take a gander at a few prints, how about we speak a little about what’s new with the PRO-4000. All things considered, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really decreases the quantity of hues from 12 to 11 shade inks, however they included another Chroma Optimizer.

From the Canon site, I see that “LUCIA PRO ink plan incorporates small scale epitomized colorants that empower smooth inclinations, an extended shading range, and more profound shading articulation.” In numerous ways, I concur with this announcement, yet I’m really not persuaded that the shading extent is extended. Indeed, for some particular circumstances utilizing matte media I’d the extent has been gotten a bit, however I’ll speak more about this later…

The Chroma Optimizer is utilized when imprinting on gleaming and semi-polished media, and goes about as a reasonable coat, enhancing shading and enhances the dim regions of shine prints. The new inks and Chroma Optimizer are likewise said to enhance scratch protection and lessen graininess. We’ll investigate some real prints in the blink of an eye.

I was likewise upbeat to find that the dark line that was constantly left on the correct underside of the prints is never again an issue. That is something that bothered the hellfire out of my about my iPF6350 and I realize this was not settled the 6450, so it’s pleasant this is at long last settled.

Just a single Print Head

While my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and against stopping up innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, accepting that you’d change the two heads on the old models obviously. Having recently the one head additionally empowered Canon to make the printer smaller in width, which is a decent space saver.

Having quite recently the one print head likewise empowered Canon to accelerate the printing extensively. A 18 x 24 inch print on my old printer used to take around 9 minutes, however with the new PRO-4000 a similar size print takes estimated 3 minutes 40 seconds.

New Media Loading Mechanism

The media stacking instrument has likewise been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (beneath). In the wake of dropping the media on its holder into put, you turn the move holder which controls the media up into the printer, until the point when you hear a beep, to tell you that the printer would now be able to encourage the media.

At that point, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and nourish the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we additionally now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

This is an advantage since it implies that tidy is less inclined to settle on the print side of the media as you print, and tidy that is as of now on the media, will probably tumble off, before it’s imprinted on. On the off chance that you print on tidy, the tidy for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again starting with no outside help.

Media Information Update

Another extremely decent touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Some time recently, on the off chance that I included a custom media compose, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media once more.

Presently, you can simply go to the printer drivers and open up the Printer Utilities, and select Media Information from the pulldown, and tap the catch to refresh the media. This at that point goes to the printer and looks at the media data on the printer, and if it’s diverse to the media that the printer drivers think about, it will refresh this data for you. It’s exceptionally smooth, and an extremely welcome element.

Wifi and Gigabit Ethernet Connectivity

The PRO arrangement of printers now likewise bolsters Wifi Connectivity and the wired system interface is presently Gigabit Ethernet. We can likewise still associate with the printer with USB. You would now be able to print PDF and JPEG records specifically from a memory stick also.

I have now printed with Wifi, LAN and USB, and observed Wifi to be a little on the moderate side for a not too bad measured print, so I purchased a 10 meter USB link so I can print from my feasting table, which truly speeded things up. Despite the fact that it’s just High Speed USB2, it’s significantly speedier than Wifi.

I additionally really purchased a 20m Ethernet link, with the goal that I can connect the PRO-4000 straightforwardly to my switch on the 3F on the off chance that I have to complete a considerable measure of work from the studio. With USB being so quick, I don’t know I’ll do this regularly, however I at any rate now have the alternative.

Three Sizes of Ink Tanks

Another extraordinary change as I would like to think is the capacity to now browse three sizes of ink tanks, with 160ml, 330ml, and 700ml tanks accessible. My old iPF6350 took 130ml ink tanks, so even the littlest of the new tanks holds 30ml more ink. I could top off the new PRO-4000 with 160ml tanks, yet now having the alternative to introduce bigger tanks, and blend and match the sizes, implies we can choose the tank estimate in view of how rapidly the inks rundown.

The PRO-4000 accompanies an arrangement of ink cartridges holding 190ml. Before we introduced the cartridges into the printer, I took this photo for correlation (underneath). On the left is a 190ml cartridge, and on the privilege is a 700ml.

I have likewise gotten somewhere in the range of 330ml cartridges, and would incorporate one in this photograph as well, however they are really an indistinguishable size from the 190ml cartridge you see here. The main distinction is that they aren’t as vigorously indented as this 190ml cartridge. You perceive how it is inset where it says Canon and the white name is? The 330ml cartridges don’t go in that far, that is the main contrast.

Blend and Match Inks

In the course of the most recent six years that I’ve been utilizing my old huge arrangement printer, I’ve discovered that since I complete a ton of highly contrasting printing, the Matte Black and Photo Black, and the Gray inks tend to rundown the snappiest, so I have purchased a 700ml tank for the Matte and Photo Blacks and the Photo Gray. So I could demonstrate to you the distinction in estimate however, I requested a 330ml Gray, for correlation with the starter inks, just to discover they were a similar size, as I just said.

I likewise purchased a 700ml tank for the Chroma Optimizer, on the grounds that I’ve heard this keeps running down before long. At somewhat more than $300 a fly for the 700ml ink tanks however, I figure I will abstain from utilizing 700ml tanks for everything except the substantial use blacks and grays, unless I begin to take many more general print arranges that is. The good thing however is that we now have this alternative, and having the capacity to blend and match tank sizes is incredible!

Changing Inks on the Fly

Another incredible new element is that the inks are presently drawn down into a Sub-Ink Tank System, which permits the greater part of the accessible ink in a tank to be utilized before replacing it, to diminish squandered ink, even better, exhaust tanks would now be able to be supplanted on the fly, without ceasing the printer. I haven’t attempted this yet, however that is the thing that the documentation says.

Standard’s Print Studio Pro Has No Border Settings (Corrected)

Another new bit of programming from Canon that I attempted it their Print Studio Pro, which at first look looks OK, yet I saw straight away that there was no real way to enter particular outskirt measurements. I get a kick out of the chance to print my pictures at a particular counterbalance, marginally above focus, and to achieve this in Lightroom or Capture One, I ca provides the installer to use your devices with Canon imagePROGRAF PRO-4000S Drivers Download the file is free from viruses and malware.

In case you need to build Connection Using WPS

  1. Please be sure that the access point button is ready to be excecuted.
  2. Please hold down for a couple second the Wi-Fi button (A) on the printer until the Alarm lamp (B) flashes once, at that point discharge the Wi-Fi button after the blaze.
    figure: Press and hold the Wi-Fi button and the Alarm lamp flashes once
  3. Ensure that the Wi-Fi lamp (C) flashes rapidly and the ON lamp (D) is lit, at that point press and hold the catch on the entrance point inside 2 minutes.
    figure: The Wi-Fi lamp flashes quickly and the ON lamp lights up
  4. Ensure that the Wi-Fi lamp and the ON lamp are lit.
    figure: The Wi-Fi lamp and the ON lamp lights up

    On the off chance that the Alarm lamp lights up, go to “Troubleshooting.”

Canon imagePROGRAF PRO-4000S Drivers Download links/mirror

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)
Page 1 of 11