Canon Ij Setup imagePROGRAF PRO-2000

Canon Ij Setup imagePROGRAF PRO-2000

Canon Ij Setup imagePROGRAF PRO-1000 Canon Ij Setup imagePROGRAF PRO-1000

Canon Ij Setup imagePROGRAF PRO-2000 – The PRO-2000 printer is a 24″ width vast configuration printer. It’s fundamentally the same as the 44″ PRO-4000 and 60″ PRO-6000.Keith Cooper has been dragging it through hell for this longish audit which focuses on utilizing the printer for superb photographic printing.

For the greater part of this survey, the PRO-4000 and 6000 can be thought of as essentially more extensive forms of the 2000.There is a different article covering Installation and setup of the PRO-2000 which is best to begin with on the off chance that you are getting a spic and span printer. This takes a gander at all the things you have to do to prepare the printer for printing. It incudes organizing points of interest and programming establishment.

Canon Ij Setup imagePROGRAF PRO-2000

The PRO-2000 is a 24″ width extensive arrangement printer. Though the past iPF6100, iPF6300 and iPF 6400 demonstrated an enduring development in plan, the PRO arrangement of printers looks particularly changed (joins are to my audits of past models).The printer is greater and heavier than past models and has a substantially higher ink limit – those two boxes at the back hold 12 ink trucks in sizes up to 700ml. The inks have been reformulated offering further blacks (on photograph media) and have swapped the green ink of the past models for an unmistakable gleam coat or ‘Shading Optimiser’ (CO) ‘ink’.

One misfortune from the prior models is a best stacking sheet media opening. Sheet media presently needs stacking physically at the front, similarly that the 44″ and 60″ adaptations of the past models did, (for example, the 44″ iPF8300 I have here).

All printers currently can acknowledge a second move unit, which can be exchanged between move feed or move take-up. This is standard on the PRO-6000, and discretionary for the PRO-2000 and PRO-4000. You can see it being utilized as a part of take-up mode above.I’ve as of late investigated the 17″ PRO-1000 printer which can be thought of as a littler ‘sheet just’ rendition of the PRO-2000. All my print quality perceptions in that (long) survey are relevant to the PRO-2000.The fundamental highlights from Canon: [Full Specs at foot of article]

  • Utilizing LUCIA PRO 12 inks, enhanced blacks and shading
  • Another 1.28″ wide print head empowers speedier printing
  • Discretionary double move unit bolsters constant paper feed or programmed take-up of the printed yield.
  • Ergonomic outline with a level best surface for print checking and 3.5″ shading LCD contact screen activity board.
  • Coordinate printing for PDF and JPEG record positions from USB memory stick.
  • Wi-Fi and wired network
  • Ensured shading consistency amongst employments and diverse creation destinations.
  • High-limit “hot swap” ink tanks for continuous printing.
  • The Print Studio Pro module gives you a chance to print from programming, for example, Lightroom, Photoshop and Canon’s Digital Photo Professional
  • I’ll cover these highlights and more in the survey. All testing here is with Apple Macs (OSX 10.10 and 10.11), however PC utilize is practically comparative.

Once stacked with ink, the printer can’t be tilted to any critical degree, so our own was collected by the provider, yet not set up at all. This enabled the printer to be expelled from the stand and taken through to the back of the house.The printer is effortlessly controlled by means of the shading contact screen, which gives you a chance to look through menu screens with a straightforward swipe of the screen.

The orange light over the screen is a notice light – for this situation this is on the grounds that a portion of the inks are low.Great, yet for the reality the inks appeared as low directly after starting setup (with the provided 160ml cartridges) and kept on doing as such directly through my opportunity testing the printer. I’ll return to ink utilization later, however I’d simply take note of that a notice light that is dependably on rapidly loses its capacity to get your attention.There are numerous settings that you can change, yet I’d generally recommend that in the event that you don’t realize what a setting does, it’s a decent sign that you may leave off any progressions until the point when you acknowledge what it does.I should take note of that the Canon approach is to have bunches of extra spouts in the print take which are mapped off in the event that they fall flat. This implies you’re probably not going to perceive any fizzled spout checks until the point when the print head needs supplanting. The new printers have one single print set out unit toward all hues, instead of the two in past huge printers.The printer is so far too new an item to give any significant expectations about print head life, other than to advise you that – all-huge arrangement printers (any make) disdain extensive stretches of neglect and that a printer utilized each couple of days is very liable to be more solid than one that is frequently left unused for a considerable length of time.

Canon Ij Setup imagePROGRAF PRO-2000 Alignment and feed alteration

The print head gathering has sensors worked in to it that let the printer perform alignment checks. This guarantees your printer is working at a known standard of execution. It isn’t the same as ICC paper profiling and the printer can’t do this.

I’ve specified alignment in detail in the setup article, however do as such again here since it’s a critical advance in guaranteeing ideal printer execution. It needs doing after beginning setup and positively on the off chance that you supplant the print head. I’d likewise propose doing it after you’ve had the printer for a couple of months and after that in any event every year. A few clients in the pre-press and sealing business should do things like this all the more regularly, however I’m coordinating my remarks generally at picture takers simply needing to make extraordinary looking huge prints.Paper Loading and Media dealing with

The printer is principally gone for move paper clients. That doesn’t imply that it doesn’t function admirably with sheet paper, only that contrasted with the 17″ PRO-1000 it feels somewhat more unwieldy to utilize. On the other hand, you can’t print a 30″ x 15″ all encompassing sheet on the PRO-1000.You’ll see a material print catcher unit on the front of the printer. This can be reconfigured in various routes for various utilization situations. The printer I’m taking a gander at here is a Canon test unit, and the outline is somewhat extraordinary to the transportation printers. I’ve more data about arranging the print catcher in the PRO-2000 printer setup article.

The printing territory is appeared beneath with feed rollers and just before them, the gaps and spaces of the paper vacuum framework which holds paper level and gathers any overspray from borderless printing. On the off chance that you do much borderless printing I’d recommend giving this region a wipe with a marginally sodden material now and then, to decrease ink development and the danger of smears on prints and fingers.You can likewise observe the blue paper roller shaper get together at the right. This is anything but difficult to get to for sharp edge substitution, and closer to the front of the printer. Each sort of move media I tried (counting canvas) was neatly cut.

I tried a few cut sheet papers amid the time the printer was here. The cases underneath are my standard arrangement of test pictures for another paper, for this situation Pinnacle Velvet, a 275gsm finished workmanship paper from a neighborhood (Leicester, UK) provider.You can see a profile focus at the back, a paper propel test picture (dark square), a check for the B&W print mode, and a shading test picture made with the profile made for the paper.I’ll take a gander at custom media settings and profiling in more detail later.Roll mediaAmid testing I attempted media extending from 90gsm (translucent) following paper through to half millimeter thick workmanship papers, and two distinct thicknesses of canvas.I’ve a few moves of vagrant papers in our print room that I was sent to test previously and have lost the first box.Presently, I’ve really a quite smart thought what the greater part of them are, however they may not be openly accessible or now under an alternate name, so I discover them great to test my ‘new paper’ forms.Here’s a light workmanship paper (matt OBA free) on a 3″ center.The screen gives clear guidelines for stacking in case you’re unsureAuto exchangingOne of the highlights of the printer is that it can swap move papers without requiring administrator consideration. Exactly how valuable this is relies upon the sorts of printing you do.In case you’re printing miles of prints on photograph papers or light-medium canvas then this could be an extraordinary help. That and if maybe you don’t confide in the capacities of your administrators past not strolling into the printers… ;- )

I attempted it with compelling artwork media (I have a gently finished variant of the overwhelming workmanship paper too) and it truly didn’t work exceptionally well, with the rewinding making the paper disconnect from the center and ‘buoy’.No issues with a light photograph paper like the Canon 200gsm, however I don’t for the most part offer prints on light papers.Substantial thick papers truly need to unroll – the paper wrap on this one in reality left a slight stamp on the paper, losing a couple of creeps at the startCustom Media composesWhen utilizing a Canon paper, you can simply utilize the standard media setting for that paper. In fact, you may pick a specific setting for an outsider paper, to coordinate the one utilized when the paper provider made an ICC profile.Anyway a great programming bundle, the Media Configuration Tool (MCT), is accommodated altering and making custom media data.Why go to the inconvenience of utilizing it?Suppose you have a photograph paper that accompanies an ICC profile made utilizing the Canon Ij Setup imagePROGRAF PRO-2000 Satin 240gsm media setting.By making a custom media write in view of the Canon Satin 240gsm base media compose you can determine it on the front board when stacking the paper.Alright, that lessens the potential for blunders, what else do you get?The custom media can have a feed alteration enhanced for that paper (lessening the odds of banding and different impacts that may encroach on print quality).

On the off chance that you utilize the Accounting Tool (of which more in a bit) for monitoring paper and ink utilize, at that point the custom media can have particular bookkeeping data related with it, for all the distinctive sizes you utilize (e.g. costs for A3+ and A2 sheets and 15 meter rolls).On the off chance that you truly need to expand quality for a specific media write you can provides the installer to use your devices with Canon Ij Setup imagePROGRAF PRO-2000 the file is free from viruses and malware.

In case you need to build Connection Using WPS

  1. Please be sure that the access point button is ready to be excecuted.
  2. Please hold down for a couple second the Wi-Fi button (A) on the printer until the Alarm lamp (B) flashes once, at that point discharge the Wi-Fi button after the blaze.
    figure: Press and hold the Wi-Fi button and the Alarm lamp flashes once
  3. Ensure that the Wi-Fi lamp (C) flashes rapidly and the ON lamp (D) is lit, at that point press and hold the catch on the entrance point inside 2 minutes.
    figure: The Wi-Fi lamp flashes quickly and the ON lamp lights up
  4. Ensure that the Wi-Fi lamp and the ON lamp are lit.
    figure: The Wi-Fi lamp and the ON lamp lights up

    On the off chance that the Alarm lamp lights up, go to “Troubleshooting.”

Canon Ij Setup imagePROGRAF PRO-2000 links/mirror

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)
Page 1 of 11